Fibreglass Developments Ltd are manufacturers of

Bermuda Swimming Pools

Bermuda Pools have been around for the past 30 years and have been installed on a multitude of sites with varying degrees of difficulty. All Bermuda Pools are manufactured on a mould under controlled conditions in the factory which enables the highest quality to be obtained and provides a smooth surface highly resistant to water chemicals,

Bermuda has a good range of moulds to choose from, to suit most sites and needs. If the standard mould does not met the client's wishes, or if size is a problem, a custom built pool can be made using the same moulded system. The pool can be made in sections and joined either in the factory or on site. Pools can also be fitted with high speed swim jets to swim against the current.

All pool installations are priced individually and are always provided with a written quotation. All installations are carried out by Bermuda Pools' highly trained installers and carry a 10-year warranty against faulty manufacture and all other equipment carries the manufacturers warranty. Experience has shown that a Bermuda Pools should have a life span of at least 20-years or more.

There are many optional extras available such as pool covers, pool heating systems, automatic sanitising equipment, automatic vacuum equipment, underwater lights, pool area fencing, etc.

A Bermuda one piece fibreglass pool can usually be completely installed in three days. This includes delivery to site and installation. Commissioning will take place after the pool is filled which will be dependent on the water supply.

Check out the range of models available:

Caprice Pool

9.0 x 4.5 x 1.5

Ambassador Pool

7.5 x 4.35 x 1.37

Imperial Pool

7.8 x 4.25 x 1.37

Regal Pool

7.2 x 3.6 x 1.37 deep

Crown Pool

6.6 x 3.6 x 1.2 deep

Statesman Pool

7.20 x 4.25 x 1.32

Installation costs do vary according to location and surrounding circumstances. For example high water table, rocks, where we are unable to dig by machine etc. During excavation complications can occur from unmarked sewers or field-tiles. If so we will notify you immediately and arrange a drain layer to give a quotation to relocate your pipes or carry out the necessary work etc.

A trained pool consultant will be pleased to visit your site and quote on any size or shape of Bermuda swimming pools, without obligation. Any extra work required during installation will be noted on a separate contract.

For further information please phone:

Bermuda Pools Ltd

06 379 7488 or 0800 4APOOL (0800 42 7665)

Fibreglass Developments Ltd

25-29 Mahinui Street, PO Box 391, Feilding, New Zealand.

Telephone: +64 6 323 0960 Fax: +64 6 323 0973 Email: info@composites.co.nz